交换机商城 JHJMall

买交换机就在交换机商城  JHJ.cn

China Network Operation Administration Maintenance

Switch on the power of your network

Your network needs to evolve to meet new demands. So do your switches.

DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER |光纤存储交换机8G单模模块 40KM| 2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach)

DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER |光纤存储交换机8G单模模块 40KM| 2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach)

DS-SFP-FC8G-ER= 2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach) DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER |光纤存储交换机8G单模模块 40KM

DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER  |光纤存储交换机8G单模模块 40KM|  2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach)
DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER  |光纤存储交换机8G单模模块 40KM|  2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach)
交换机商城微信客服二维码

微信扫一扫,价格早知道

股票开户   基金股票实战训练营 手把手教会炒股

淘股养家

DS-SFP-FC8G-ER= 2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach) DS-SFP-FC8G-ER= | 思科光纤存储交换机光模块 | Cisco DS-SFP-FC8G-ER |光纤存储交换机8G单模模块 40KM

DS-SFP-FC8G-ER=

Cisco 8 Gbps光纤通道SFP+模块

Cisco 8 Gbps光纤通道SFP+模块(图3)为Cisco MDS 9000系列平台上的2/4/8 Gbps端口提供光纤通道连接。有三种类型可供选择:Cisco光纤通道短波SFP+(部件号DS-SFP-FC8G-SW)、Cisco光纤通道长波SFP+(部件编号DS-SFP-FC 8G-LW)和Cisco光纤通道扩展范围SFP+。每个都提供2/4/8-Gbps自动感知光纤通道连接。

DS-SFP-FC8G-ER=
Figure 3.            Cisco 8-Gbps Fibre Channel SFP+ Modules

产品概述

Cisco®小型可插拔(SFP)、增强型SFP(SFP+)和X2设备是热插拔收发器。收发器插入Cisco MDS 9000系列控制器交换模块和结构交换机端口。它们允许您逐个端口选择不同的布线类型和距离。

您可以将它们与Cisco MDS 9000系列产品一起使用,如表1所示。

Technical specifications

Connectors and Cabling

The connectors are dual LC connectors.

Table 10 summarizes the cabling specifications.

Table 10.     Cisco 8-Gbps Fibre Channel SFP+ Cabling Specifications

SFP+Wavelength (nanometers)Fiber TypeCore Size (microns)Baud Rate (GBd)Cable Distance
DS-SFP-FC8G-SW850MMF62.562.562.550.0 (OM2)50.0 (OM2)50.0 (OM2)50.0 (OM3)50.0 (OM3)50.0 (OM3)50.0 (OM4)50.0 (OM4)50.0 (OM4)50.0 (OM5)2.1254.2508.5002.1254.2508.5002.1254.2508.5002.1254.2508.5008.500492 ft (150m)230 ft (70m)69 ft (21m)984 ft (300m)492 ft (150m)164 ft (50m)1640 ft (500m)1246 ft (380m)492 ft (150m)1706 ft (520m)1312 ft (400m)623 ft (190m)623 ft (190m)
DS-SFP-FC8G-LW1310SMF9.09.09.02.1254.2508.5006.2 mi (10 km)6.2 mi (10 km)6.2 mi (10 km)
DS-SFP-FC8G-ER1550SMF9.09.09.02.1254.2508.50024.85 mi (40 km)24.85 mi (40 km)24.85 mi (40 km)

Note:      The minimum cable distance for all SFP+ modules listed (MMF and SMF) is 6.5 feet (2 meters).

Note:      SMF must be ISO/IEC OS2 compliant

Dimensions

The dimensions (H x W x D) are 8.5 x 13.55 x 56.5 mm.

Environmental Conditions and Power Requirements

Table 11 presents the optical parameters, and Table 12 presents temperature ranges.

Table 11.     Optical parameters

SFPAverage Transmit Power (dBm)Average Receive Power (dBm)Fiber Loss Budget (dB)
MaximumMinimumMaximumMinimum(62.5 microns)(50.0 microns [OM2])(50.0 microns [OM3])
DS-SFP-FC8G-SW-1.3-10 (2 Gbps)-9 (4 Gbps)-8.2 (8 Gbps)02.10
(2 Gbps)1.78
(4 Gbps)1.58
(8 Gbps)
2.62 (2 Gbps)2.06 (4 Gbps)1.68 (8 Gbps)3.31 (2 Gbps)2.88 (4 Gbps)2.04 (8 Gbps)
DS-SFP-FC8 G-LW-3 (2 Gbps)-1 (4 Gbps)0.5 (8 Gbps)-11.7
(2 Gbps)-8.4 (4 Gbps)-8.4 (8 Gbps)
-3 (2 Gbps)-1 (4 Gbps)0.5 (8 Gbps)-7.8 (2 Gbps)7.8 (4 Gbps)6.4 (8 Gbps)
DS-SFP-FC8G-ER4-4.7-110.9

Table 12.     Operating and storage temperature ranges

SFPOperatingStorage
MaximumMinimumMaximumMinimum
DS-SFP-FC8G-SW40°C0°C85°C-40°C
DS-SFP-FC8G-LW40°C0°C85°C-40°C
DS-SFP-FC8G-ER40°C0°C85°C-40°C

Regulatory and Standards compliance*

●      Compliant with Fibre Channel FC-PI 800-SM-LC-L, FC-PI 800-M5-SN-S, FC-PI 800-M5E-SN-I, and FC PI 800-M6-SN-S 8.5 GBd specifications

●      Compliant with Fibre Channel FC-PI 400-SM-LC-L, FC-PI 400-M5-SN-I, FC-PI 400-M5E-SN-I, and FC PI 400-M6-SN-I 4.25 GBd specifications

●      Compliant with Fibre Channel FC-PI 200-SM-LC-L, FC-PI 200-M5-SN-I, FC-PI 200-M5E-SN-I, and 200 M6 SN-I 2.125 GBd specifications

●      Laser Class I 21CFR1040

* Applicable only to DS-SFP-FC8G-SW and DS-SFP-FC8G-LW.

Ordering information

Table 13 provides ordering information.

Table 13.     Cisco Fibre Channel SFP+ ordering information

Part NumberDescription
DS-SFP-FC8G-SW2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC
DS-SFP-FC8G-SW=2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC, Spare
DS-SFP-8G-SW-4=2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC, 4 pack, Spare
DS-SFP-FC8G-LW2/4/8-Gbps Fibre Channel-Longwave, SFP+, LC
DS-SFP-FC8G-LW=2/4/8-Gbps Fibre Channel-Longwave, SFP+, LC, Spare
DS-SFP-FC8G-ER2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC (40 km Reach)
DS-SFP-FC8G-ER=2/4/8-Gbps Fibre Channel Extended Reach SFP+, LC, Spare (40 km Reach)

表1.可用于Cisco MDS 9000系列的Cisco SFP、SFP+和X2收发器光模块

Cisco SFP, SFP+, and X2 Transceivers Available for Use with the Cisco MDS 9000 Series

Switching Module and Fabric SwitchDS-SFP-FC-2G-xxDS-SFP-FC4G-xxDS-SFP-FC8G-xxDS-SFP-FC10G-xxDS-SFP-FCGE-xxDS-SFP-GE-TDS-X2-FC10G-xx (non-CX4)BDS-SFP-FC16G-xx/DS-SFP-FC16GXXXDS-SFP-FC32G-XX
DS-X9232-256K9 Yes2,10Yes2Yes2     
DS-X9248-256K9 Yes2,10Yes2Yes2     
DS-X9304-18K9 Yes2  Yes1YesD   
DS-X9316-SSNK9    YesFYesF,15   
DS-X9704      Yes2  
DS-C9220I-K9*  Yes2,19    Yes2,19Yes2
DS-C9222i-K9 Yes2  Yes1YesD   
DS-C9124-K9 Yes2       
DS-C9148-K9 Yes2,7Yes2,11      
DS-X9448-768K9  Yes2,14Yes2   Yes2 
DS-C9250I-K9  Yes2,14 Yes17Yes17 Yes2 
DS-C9396S-K9  Yes2,14Yes2   Yes2 
DS-C9148S-K9  Yes2,14    Yes2 
DS-X9334-K9  Yes2,14YesYesYes Yes2 
DS-X9648-1536K9  Yes2,19    Yes2Yes2
DS-C9132T-K9  Yes2,19    Yes2,19Yes2
DS-C9148T-K9  Yes2,19    Yes2,19Yes2
DS-C9396T-K9  Yes2,19    Yes2,19Yes2
Switching Module and Fabric SwitchDS-X2-FC10G-CX4=CDS-X2-E10G-SR=ADS-CWDM-xxxx=DS-CWDM4 Gxxxx=ADS-CWDM8 Gxxxx=DWDM-SFP-xxxx=AONS-SC-4G-xx.x= GSFP-10G-XX/DS-SFP-10GE-XXSFP-H10GB-xCUMDWDM-X2-xx.xx=EDWDM-SFP10G-xx.xx=QSFP-40G-SR4, CSR4, SR-BD, QSFP-40G-LR420, QSFP-40G-ER420
DS-X9232-256K9   Yes2,13  Yes2Yes8,12    
DS-X9248-256K9   Yes2,13  Yes2Yes8,12    
DS-X9304-18K9  Yes6Yes2,13 Yes2,6Yes2     
DS-X9316-SSNK9  YesF  YesF      
DS-X9704Yes2Yes2       Yes2  
DS-X9708-K9       Yes8,12Yes9   
DS-C9220I-K9*Yes14,18Yes14,18          
DS-C9222i-K9*  Yes6Yes2,13 Yes2,6Yes2     
DS-C9124-K9  Yes3Yes2,4  Yes2     
DS-C9148-K9   Yes2,13Yes2,13,H Yes2     
DS-X9448-768K9    Yes2,13,H  Yes8    
DS-C9250I-K9    Yes2,13,H,14  Yes8Yes9 Yes2,16 
DS-X9848-480K9       Yes8,12Yes9 Yes2 
DS-C9396S-K9    Yes2,13,14  Yes8    
DS-C9148S-K9    Yes2,13,14       
DS-X9824-960K9    Yes2, 13,14      Yes
DS-X9334-K9    Yes2,13,14  YesYes Yes 
DS-X9648-1536K9    Yes2,13,14       
DS-C9132T-K9    Yes2,13,14       
DS-C9148T-K9    Yes2,13,14       
DS-C9396T-K9    Yes2,13,14       
Switching Module and Fabric SwitchDS-8G-ZR-XXXXDS-16G-ER-XXXX          
DS-X9448-768K9Yes14,18Yes14,18          
DS-C9250I-K9Yes14,18Yes14,18          
DS-C9396S-K9Yes14,18Yes14,18          
DS-C9148S-K9Yes14,18Yes14,18          
DS-X9334-K9Yes14,18Yes14,18          
DS-X9648-1536K9Yes14,18Yes14,18          
DS-C9132T-K9Yes14,18Yes14,18          
DS-C9148T-K9Yes14,18Yes14,18          
DS-C9396T-K9Yes14,18Yes14,18          

ASupported on switches running Cisco MDS 9000 SAN-OS Software Release 3.1(3) or later.

BDS-X2-FC10G-ER supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.1(3) or later.

CSupported on switches running Cisco MDS 9000 SAN-OS Software Release 3.2(1) or later.

D Supported on switches running Cisco MDS 9000 SAN-OS Software Release 3.3(1) or later.

ESupported on switches running Cisco MDS 9000 NX-OS Software Release 4.1(1) or later.

F Supported on switches running Cisco MDS 9000 NX-OS Software Release 4.2(1) or later.

G Supported on switches running Cisco MDS 9000 NX-OS Software Release 5.0 or later.

H Supported on switches running Cisco MDS 9000 NX-OS Software Release 6.2.5 or later.

1Supported on Ethernet ports only.

2Digital diagnostic monitoring supported.

3Limited to 60 km.

4Limited to 30 km.

5DS-X2-FC10G-ER not supported.

6Supported on both Fibre Channel and Ethernet ports.

7Only DS-SFP-FC4G-SW is supported.

8Only -SR, -LR, and -ER are supported.

9Passive copper -CU1M, -CU3M, -CU5M, and active copper -ACU7M and -ACU10M Twinax cables are supported.

10DS-SFP-4GF-MR is not supported.

11Maximum distance with DS-SFP-FC8G-ER is limited to 31 km.

12Maximum distance with SFP-10G-ER is limited to 20 km.

13Maximum distance for Coarse Wavelength-Division Multiplexing (CWDM) optics is 25 km to account for dB loss in CWDM multiplexer and demultiplexer.

14Refer to Configuration Limits for Optics Modules.

15Ethernet autonegotiation is not supported.

16Supported only for Fibre Channel over Ethernet (FCoE) ports prior to Cisco MDS 9000 NX-OS Release 6.2.15.

17Supported on NX-OS Release 6.2.13 and later.

18Refer to page 51 for ordering, support and technical information on Third Party optical modules.

192G speeds not supported on 32G module. Only 4G speeds and 8G speeds supported when 8G SFPs are used. Only SW and LW supported on 32G module. Supported in NX-OS 8.x version and higher.

20Refer to Cisco 40GBASE QSFP Datasheet for detailed specifications.

*DS-C9220i-K9 supports the following Ethernet optics .

SpeedOptics PIDFiber
1GGLC-SX-MMDMMF LC
GLC-LH-SMDSMF LC
10GSFP-10G-SRMMF LC
SFP-10G-LR/ SFP-10G-LR-SSMF LC
40GQSFP-40G-CSR4MPO12
QSFP-40G-SR-BDMMF LC
QSFP-40G-LR4SMF LC

Cisco MDS 9000 Family Pluggable Transceivers Data Sheet ( 官方英文参数 )

      

 

微信扫一扫,下次方便不用找!

为提高您的询价效率,节省供货时间,请用微信扫描下方经理名片二维码,加好友备注保存,备用

交换机商城在线客服:kaihubang

微信扫一扫,下次不用找

负责业务:
负责企业级网络产品交换机,华为路由器,防火墙, 无线Wlan,视频会议,数据中心,eSight,Aglie Controoler网管软件等全线产品在线销售支持。

公司总机:   

400-880-6006    139-1073-6192

买交换机,就在交换机商城  (https://www.jhj.cn)

交换机商城在线客服

联系我们

地址:北京市海淀区上地三街中黎科技园3号楼4F

电话:400-880-6006              13910736192

邮箱: li@cnoam.com              010-86462600

交换机商城在线客服
热线电话
扫码问价
  • 扫一扫,时效快10秒
QQ客服
  • QQ客服 点击这里给我发消息
Email
Skype客服
  • Skype客服
回到顶部